OIL CHANGE SERVICE
Thorough Oil Change Service and more
Factors like delaying oil changes, low motor oil quality or wrong motor oil for the engine, lead to poor lubrication and accumulation of sludge. This is one of the main causes for many costly engine malfunction and breakdowns.
Follow these step to ensure a complete oil change service
1 - CHANGE THE MOTOR OIL AT THE RECOMMENDED INTERVALS. Oil Change intervals are normally established by the engine's mileage, and measured in Kilometers. Using Liqui Moly Motor Oils and considering "severe Driving Conditions" , this interval can be estimated at every 10,000 Km.
2 - CLEAN THE MOTOR OIL SYSTEM before adding new motor oil.
This will ensure the oil system is clean and ready to receive the fresh oil to allow optimum lubrication of the engine. Do this every 3 Oil Changes.
3 - SELECT THE RIGHT MOTOR OIL FOR THE ENGINE:
Use the LIQUI MOLY Oil Guide to find the right Motor Oil for you engine, Oil change intervals, quantity required and more
4 - REPLACE THE MOTOR OIL FILTER
Always use high quality oil filters and follow the manufacturer's recommendations.
5 - ADD AN ANTI-FRICTION ADDITIVE TO THE NEW MOTOR OIL
Anti-friction additives improve lubrication of the motor oil by making the engines internal surfaces smoother and slippier. Please note that some LIQUI MOLY Motor Oils contain anti-friction additives (Molygen and MoS2 motor oils), in which case, it is not necessary to add any more.
On cold starts, the engine oil which has been drained down to the sump, needs to be distributed to all parts of the engine for optimum lubrication. Depending on the viscosity of the oil, this can take as much as 48 seconds. During this time in which the engine is running dry., Liqui Moly anti-friction additives will protect the engine from wear.